以下是外國網頁對BF3問題的解決方法 +不盡責翻譯
I see that a lot of ppl are still having issues with the game (crashes, rubberbanding, disconnections etc etc). I resolved most of my problem, now the game is stable and i only get disconnected if the whole server that i'm playing in, crash, or if an admin log in with a reserved slot .
作者前言......略
Here's a complete and detailed list with things you can try in order to completely fix your battlefield:
Problem 1:
The game ALWAYS crash after 2-5 minutes/pc reboot itself after 2-5 minutes.
問題一:遊戲總在2-5分鐘後停止運作/電腦在2-5分鐘重啟
Solution:
-Reboot your computer, open the bios (by spamming del on your keyboard)
-Get to the motherboard configuration-north bridge configuration
-Disable HD audio. if it's enabled, you simply press + till it says is disabled.
方案一:(這個方法會停止音效卡的運作,極度不建議) 有需要我再翻譯
IMPORTANT:
by doing this, your PC audio will be completely disabled unless you have an audio card or an USB headset or something similiar (usb).
To re-enable audio, simply get back to the settings and enable HD audio again.
Problem 2:
The game crash randomly after about 15/20 minutes.
問題二:遊戲在15-20分鐘後無故死當
Solution:
-Press start (or the windows logo)
-Type in the searchbar "cmd" without the "
-Press enter
-a command windows should open up. write "bcdedit /set increaseUserVa 3072" without the "
-Press enter
解決方案:
-開始
-在搜尋打"cmd"
-按ENTER
-在裡面打"bcdedit /set increaseUserVa 3072"
-按enter
-重啟電腦
Case 1: operation concluded succesfully (or a similiar message)
-reboot PC
如出現"你沒有權限......"
請用管理員身分開啟"cmd"
Case 2: you are not allowed to do that (or a similiar message)
-Press start again
-Click "all programs"
-Click "accessories"
-RIGHT click "command prompt" and click "Run As Admin"
-Type in the command windows "bcdedit /set increaseUserVa 3072" as always without the "
-Reboot
This will fix the problem, wich is caused by memory leak
Problem 3:
Get disconnected very often without a reason.
問題三:遊戲總是莫名其妙斷線,且沒有原因。
Solution 1:
-Download PBsetup from here: PunkBuster Online Countermeasures
-Extract the files in a folder
-Run PBSETUP.exe
-Click "add a game"
-Select "Battlefield 3". The path of the game should be detected automatically, if not, point it to the right path.
-Click check for updates
-Once the downloads are over, you'll get a message "battlefield 3 is up to date" or similiar. you may now close the application.
解決方案一:
-下載PB安裝程式 : http://www.evenbalance.com/index.php?page=pbsetup.php
-解壓縮
-執行PBSETUP.EXE
-選擇"ADD A GAME"
-選擇戰地三
-選擇檢查更新
Solution 2
-Click on the windows logo/start button
-In the searchbar, type services.msc
-Press ENTER
-A list of services should now be in front of you.
-Click "extended" tab
-Search for "UPnP host devices" or something similiar (the description is something like: Allow hosting of UPnP devices blablabla)
-Right click it
-Click Properties
-I don't know how to translate this, but there is an option like "startup", in the general tab. You can choose between: Automatic (delayed startup), Automatic, Manually, Disabled. You must choose Disabled.
-Click on "stop service"
-Click "apply" and close that little windows.
-Search for "SSPD discovery" and do the same things that you did above.
-Close everything
-Reboot.
解決方案二:
-開始
-搜尋打"services.msc"
-按enter
-按"延伸"
-找"UPnP host devices" 和 "SSPD discovery"
-右點
-內容
-啟動類型:選停用
-應用
-服務狀態:選停用
-重啟電腦
Solution 3
-Open chrome/IE/firefox
-Type in the adress bar 192.168.0.1 and press enter. if nothing work with that IP, try with one of these: 192.168.1.1, 127.0.0.1, 127.0.1.1. With one of these IPs you should be able to open up your router's page.
-Log into the router panel (username is usually "admin" or "administrator", aswell as the password)
-Once you are in, you should search for an option called UPnP, and disable it. it might be somewhere in the advanced options, i really can't help you with this one because it's not on my router, and every router it's different, so you might or might not have it.
In case you still have the problem...well...go to the nearest churc and turn on a candle, then prey for a bit.
解決方案三:
-開啟瀏覽器
-打 192.168.0.1 / 192.168.1.1 / 127.0.0.1 / 127.0.1.1
-登入到router
-停用UPnP服務
如果還不能解決,請到附近的教堂,點一根蠟燭,向上帝奇祈禱。(作者說的)
Problem 4:
EXTREME rubberbanding, mostly in Caspian Borders, Teheran Highway and Grand Bazhaar.
問題四:瘋狂回溯
http://www.youtube.com/watch?v=Xolfo1p2baE <例子
Solution:
-Reboot your computer
-Spam DEL till you open the biones panel again
-Search for advanced options
-CPU configuration
-Look for an option named "HTT" or "Hyper Treading" or "Hyper Treading Technology" and press + till it's disabled.
-Save and exit
-重啟
-在開機時狂按 Delete ,直到開啟biones版面
-進階選項
-CPU
-停用"HTT"
-儲存離開
希望能夠幫助大家
原文:http://forums.electronicarts.co. ... read-carefully.html |